Edwards-signaling Genesis Ceiling Speaker Manuel d'utilisateur télécharger pdf

Installation Sheet 15DEC05 P/N: 3100611 REV: 5.0

Genesis Ceiling Speaker 1 / 2

Genesis Ceiling Speaker

Product description

The Genesis Ceiling Speaker is an audible fire alarm

notification appliance designed for indoor ceilings and walls.

See Table 1 for a list of model numbers.

The speaker includes a field configurable switch for selecting

the desired wattage tap. The wattage tap setting is locked in

place and remains visible after final installation.

Install this device in accordance with applicable requirements

in the latest editions of the NFPA codes and standards and

Canadian Electrical Code, Part 1, Section 32, and in

accordance with the local authorities having jurisdiction.

Table 1: Models

Description Number

Speaker,

25 Vrms, white

ADTGC-S2 MGC-S2

EGC-S2 XLSGC-S2

GC-S2 ZGC-S2

GC-S2-LG

Speaker,

25 Vrms, white, with

FIRE marking

ADTGCF-S2 MGCF-S2

EGCF-S2 XLSGCF-S2

GCF-S2 ZGCF-S2

GCF-S2-LG

Speaker,

70 Vrms, white

ADTGC-S7 MGC-S7

EGC-S7 XLSGC-S7

GC-S7 ZGC-S7

GC-S7-LG

Speaker,

70 Vrms, white, with

FIRE marking

ADTGCF-S7 MGCF-S7

EGCF-S7 XLSGCF-S7

GCF-S7 ZGCF-S7

GCF-S7-LG

Speaker,

70 Vrms, red, with FIRE

marking

EGCFR-S7

GCFR-S7

MGCFR-S7

Specifications

Operating voltage: 25 Vrms (model S2), 70 Vrms (model S7)

Supervisory voltage: 30 V maximum

Sound level output: See Table 2

Speaker response: 400 to 4,000 Hz

Wire size: 12 to 18 AWG (2.50 to 0.75 sq mm)

Compatible electrical boxes

North American 4 in square electrical box, 2-1/8 in deep

(UL/ULC listed flush mounted with no extension ring)

Operating environment

Temperature: 32 to 120 °F (0 to 49 °C)

Humidity: 0 to 93% RH, noncondensing at 90 °F (32 °C)

Agency listings: Meets ULC-S541 and UL 1480 fifth edition.

Meets BS EN 60065:2002. Nameplate marking is located

on the inside surface of the device.

Table 2: Sound level output (dBA)

Wattage 25V (UL) 25V (ULC) 70V (UL) 70V (ULC)

1/4 W 80 78 80 81

1/2 W 84 81 84 81

1 W 87 87 87 87

2 W (UL) 90 91

2.2 W (ULC) 90 90

dBA = Decibels, A-weighted

UL 1480: Sound level output at 10 ft (3.05 m) measured in a

reverberant room using 400 to 4,000 Hz band limited pink

noise.

ULC-S541: Meets or exceeds 85 dBA in an anechoic chamber

at 10 ft (3.05 m).

Directional characteristics: Within 6 dB of on-axis sound level

when measured 90° off-axis (horizontal).

Installation instructions

Caution: Electrical supervision requires the wire run to be

broken at each terminal. Do not loop the signaling circuit field

wires around the terminals.

To install the speaker:

1. Remove the cover by depressing the tab on the side of the

unit with a small screwdriver. Turn the cover

counterclockwise to release.

2. Connect the speaker terminals to the signal circuit field

wiring. You must observe polarity for the unit to function

properly. See Figure 1.

3. Slide the wattage switch to the desired wattage tap (2 W,

1 W, 1/2 W, or 1/4 W) by aligning it with the indicator

below the switch. See Figure 2.

1 2

Genesis Ceiling Speaker 1
Maintenance 2

Résumé du contenu

Page 1 - Genesis Ceiling Speaker

Installation Sheet 15DEC05 P/N: 3100611 REV: 5.0 Genesis Ceiling Speaker 1 / 2 Genesis Ceiling SpeakerProduct description The Genesis Ceiling

Page 2 - Maintenance

P/N: 3100611 REV: 5.0 15DEC05 Installation Sheet 2 / 2 Genesis Ceiling Speaker 4. Mount the unit onto a compatible electrical box. The switch se

Commentaires sur ces manuels

Pas de commentaire

Edwards-signaling Genesis Ceiling Speaker Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Sécurité Edwards-signaling Genesis Ceiling Speaker. Edwards Signaling Genesis Ceiling Speaker User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Sécurité Edwards-signaling Genesis Ceiling Speaker