Edwards-signaling 6536-G5 Manuel d'utilisateur télécharger pdf

CHESHIRE, CT 203-699-3300 FAX 860-677-7746

Installation Instructions for the

6536-G5 Horn/Strobe

Description

The 6536-G5 is an audible/visual signal UL Listed for general

purpose signaling applications.

Installation

A qualified electrician familiar with National Electrical Code

and local code requirements must install this product. Failure to

follow the safety precautions in this instruction sheet could result

in product or property damage, severe personal injury or death.

Figure 1. Details of Horn/Strobe

2. Connect the horn/strobe wire leads and terminals (Figure 2).

The horn and strobe are connected together at the factory.

NOTE: To connect the horn and strobe to different circuits,

loosen the terminals, remove the two wires and cap off

with wire nuts.

3. Mount the horn/strobe onto the electrical box. Secure it using

two screws (supplied).

4. Perform an operational test.

Maintenance

WARNING

To reduce the risk of shock, do not remove lens or

tamper with unit when the circuit is energized. Do

not connect AC power until installation is complete.

WARNING

To reduce the risk of shock, do not remove lens or

tamper with unit when the circuit is energized.

Disconnect power and allow five (5) minutes for

stored energy to dissipate before starting work or

disassembly. High energy could be stored in the

strobe circuit once it is energized.

Figure 2. Connecting the Horn and Strobe

The 6536-G5 horn/strobe (Figure 1) can be mounted on any single

gang 2" x 4" (51 mm x 102 mm) electrical box, double gang 4" x 4"

(102 mm x 102 mm) electrical box, or standard 4" x 4" (102 mm x

102 mm) junction box with a plaster ring.

1. Install an appropriate electrical box using suitable hardware.

Perform regularly scheduled testing at least twice a year or more

often as dictated by local authorities having jurisdiction.

Table 1. Specifications

Operating Voltage 24V 50/60 Hz 24V DC

Alarm Current 175 mA 125 mA

SIGNAL

STROBE

4 1/2"

(114 mm)

4 9/16"

(116 mm)

Strobe

To separate 24V AC

or 24V DC power source

Horn

Mounting

screws

FRONT

VIEW

BACK

VIEW

Factory installed

wires

Factory

Connected

Single 24V AC or

24V DC Power Source

Electrical Box

Red (+)

White (-)

6536-G5 Horn/Strobe 1

Résumé du contenu

Page 1 - 6536-G5 Horn/Strobe

Commentaires sur ces manuels

Pas de commentaire

Edwards-signaling 6536-G5 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Sécurité Edwards-signaling 6536-G5. Edwards Signaling 6536-G5 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Sécurité Edwards-signaling 6536-G5