Edwards-signaling 7007B-N5 Manuel d'utilisateur télécharger pdf

7007B-N5 Audible/Visible Signal-Strobe

Installation Sheet

Description

The 7007B-N5 series of devices are UL Listed audible/visible-

signal-strobes for general purpose signaling applications.

Table 1: 7007B-N5 models

Models Lens color

7007BA-N5 Amber lens

7005BB-N5 Blue lens

7007BG-N5 Green lens

7007BR-N5 Red lens

Installation

WARNINGS

• Electrocution hazard. A qualified electrician familiar with

National Electrical Code and local code requirements must

install this product. Failure to follow the safety precautions

in this installation sheet could result in product or property

damage, or severe personal injury or death.

• Electrocution hazard. To reduce the risk of shock, do not

remove the lens or tamper with the unit when the circuit is

energized. Do not connect AC power until the installation

is complete.

The 7007B-N5 (Figure 1) can be mounted on any single gang

2 × 4 in. (51 × 102 mm) electrical box, double gang 4 × 4 in.

(102 × 102 mm) electrical box, or standard 4 × 4 in. (102 × 102

mm) junction box with a plaster ring.

To install the 7007B-N5:

1. Install an appropriate electrical box using suitable

hardware.

2. Connect the wire leads as shown in Figure 2.

3. Mount the device to the electrical box. Secure it using two

screws (supplied).

4. Perform an operational test.

Figure 1: Details of 7007B-N5

1 2

2 / 2 P/N P-047550-1871 • REV 03 • REB 12FEB13 Wiring See Figure 2 for wiring connections. Figure 2: Wiring connections Maintenance WARNING: El

Pas de commentaire

Edwards-signaling 7007B-N5 Manuel d'utilisateur