Edwards-signaling Genesis WG4 Outdoor High Candela Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Sécurité Edwards-signaling Genesis WG4 Outdoor High Candela. Edwards Signaling Genesis WG4 Outdoor High Candela Manuel d'utilisation Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 10
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
© 2012 UTC Fire & Security. All rights reserved. 1 / 10 P/N 3102001-ML • REV 1.0 • ISS 04APR12
Genesis WG4 Outdoor High Candela
Horn-Strobe Installation Sheet
EN FR
EN: Installation Sheet
Description
The Genesis WG4 Outdoor High Candela Horn-Strobe is a life
safety notification appliance designed for indoor or outdoor use
on ceilings or walls. See Table 1 for a list of models and
Table 2 for a list of accessories.
For surface mount applications, mount the WG4 onto a Model
449 electrical box using the gasket shipped with the appliance.
For flush mount applications where the mounting surface is
flush with the surface of the wall or ceiling, use the WG4GSKT
gasket kit.
Note that you need a Model 449 electrical box for waterproof
applications, or a standard mount 4 in. square box for all other
applications.
The horn-strobe includes field-configurable jumper options that
allow you to set the strobe pattern to temporal or continuous,
the horn pattern to temporal or continuous, and the horn
volume to low or high. The horn-strobe also includes a field-
configurable switch for setting the strobe candela level. This
setting is locked in place and is visible after final installation.
Table 1: Models
Number Description
WG4WF-HVMHC Outdoor rated wall/ceiling horn-strobe, white with
FIRE marking, high output strobe, clear lens
Number Description
WG4WN-HVMHC Outdoor rated wall/ceiling horn-strobe, white
without marking, high output strobe, clear lens
WG4RF-HVMHC Outdoor rated wall/ceiling horn-strobe, red with
FIRE marking, high output strobe, clear lens
WG4RN-HVMHC Outdoor rated wall/ceiling horn-strobe, red without
marking, high output strobe, clear lens
Table 2: Accessories
Number Description
WG4WTS [1] Outdoor-rated surface skirt, white, for Genesis WG4
horn or horn-strobe
WG4RTS [1] Outdoor-rated surface skirt, red, for Genesis WG4
horn or horn-strobe
WG4GSKT [2]
A
ppliance replacement gasket, flush mount
[1] The trim skirt is outdoor-rated when used with the Model 449
electrical box.
[2] Not compatible with the trim skirts.
To synchronize horn-strobe operation, you must install a
separate synchronization source. See Table 3. When
connecting the horn-strobe to a listed control panel, verify
synchronization operation on the compatibility list for the
corresponding panel.
Table 3: Compatible synchronization source models
Description Number
A
uto-sync output
module
SIGA-CC1S SIGA-MCC1S
GSA-CC1S GSA-MCC1S
SIGA-CC2A SIGA-MCC2A
Genesis signal master -
remote mount
ADTG1M-RM MG1M-RM
EG1M-RM XLSG1M-RM
G1M-RM ZG1M-RM
Booster or auxiliary
power supply
APS10* EBPS10*
APS6* EBPS6*
BPS10* MIRBPS10*
BPS6* MIRBPS6*
EAPS10* XLS-BPS10*
EAPS6* XLS-BPS
* Represents any number of additional characters
Installation
Install this device in accordance with applicable requirements
and in accordance with the local authorities having jurisdiction.
Vue de la page 0
1 2 3 4 5 6 7 8 9 10

Résumé du contenu

Page 1 - EN: Installation Sheet

© 2012 UTC Fire & Security. All rights reserved. 1 / 10 P/N 3102001-ML • REV 1.0 • ISS 04APR12 Genesis WG4 Outdoor High Candela Horn-Strobe In

Page 2

10 / 10 P/N 3102001-ML • REV 1.0 • ISS 04APR12

Page 3 - Specifications

2 / 10 P/N 3102001-ML • REV 1.0 • ISS 04APR12 WARNING: Electrocution hazard. To avoid personal injury or death from electrocution, remove all sour

Page 4 - Contact information

P/N 3102001-ML • REV 1.0 • ISS 04APR12 3 / 10 Figure 3: Jumper, switch, and protective cap locations (1)(6)(3)(5)(2)(4) (1) Wire slot (2) JP3 ho

Page 5 - FR: Feuillet d’installation

4 / 10 P/N 3102001-ML • REV 1.0 • ISS 04APR12 Table 4: Sound level output (dBA), per UL 464 Volume Setting 16V 24V 33V Continuous High 89.7 9

Page 6

P/N 3102001-ML • REV 1.0 • ISS 04APR12 5 / 10 FR: Feuillet d’installation Description L’avertisseur sonore/stroboscope à haute intensité lumineuse

Page 7 - Entretien

6 / 10 P/N 3102001-ML • REV 1.0 • ISS 04APR12 Pour installer l’avertisseur sonore/stroboscope : 1. Retirer le couvercle de l’avertisseur sonore/s

Page 8 - Caractéristiques techniques

P/N 3102001-ML • REV 1.0 • ISS 04APR12 7 / 10 Figure 3 : emplacements des cavaliers, du commutateur et du couvercle de protection (1)(6)(3)(5)(2)

Page 9 - Coordonnées

8 / 10 P/N 3102001-ML • REV 1.0 • ISS 04APR12 Caractéristiques techniques Tension de fonctionnement Avertisseur sonore/stroboscope Nominal 24 V

Page 10

P/N 3102001-ML • REV 1.0 • ISS 04APR12 9 / 10 Conformité à la norme FCC Ce dispositif est conforme à la partie 15 des règles FCC. Son fonctionneme

Commentaires sur ces manuels

Pas de commentaire