Edwards-signaling 116DEXMST Series Manuel d'utilisateur télécharger pdf

Installation Instructions for 116DEXMST Series

AdaptaBeacon

Supervised 16 - 33V DC Strobes for

Use in Hazardous Locations

DescriptionDescription

Description

The 116DEXMST*-FJ DC strobe AdaptaBeacon signaling ap-

pliances are heavy duty diode-polarized strobe lights in-

tended for use in general utility signaling (non-fire alarm)

applications requiring electrical supervision of signaling

circuit field wiring. The strobes are UL and cUL listed for

use in Class I, Division 1, Group C and D, Class I, Division 2,

Group A, B, C and D, Class II, Division 1, Group E, F and G,

Class II, Division 2, Group F and G, and Class III Division 1

and 2 hazardous locations with operating temperature

codes per following chart.

The strobes are UL and cUL Listed, as Type 3R, 4X, and

Marine enclosures.

The strobe flashes a 360-degree beam of light approxi-

mately 65 times per minute.

The strobes are available in pendant, bracket, ceiling, or

stanchion mount models (Figure 1).

InstallationInstallation

Installation

a. Pendant Mount Models (Figure 2): Install the

catalog number 116EX-P, pendant mounting

module, to the main housing. Install explosion-

proof hanger box (not supplied). Secure 3/4" (19

mm) NPT threaded conduit (not supplied) to the

box. Install the unit on the conduit. Proceed to

step 2.

b. Ceiling Mount Models (Figure 3): Mount the

catalog number 116EX-C, ceiling/wall mounting

module, using appropriate hardware (not supplied)

suitable for the mounting surface. Proceed to step

c. Bracket Mount Models (Figure 4): Install the

catalog number 116EX-C ceiilng/wall mounting

module using appropriate hardware (not supplied)

for the mounting surface. Install the catalog

number 116EX-B wall mounting elbow to the wall

box. Run the unit's wiring through the elbow to

the wall box. Proceed to step 2.

d. Stanchion Mount Models (Figure 5): Install the

catalog number 116EX-S, stanchion mounting

module, to the main housing. Run the unit's wires

through the 1 1/4" conduit to the appropriate

junction box. Install the unit on the conduit.

Proceed to step 2.

2. Connect field earth ground wire to ground screw or

earth ground via conduit system.

3. Wire the unit in accordance with Figure 6. See Table

2 for required supply wire temperature ratings.

4. As appropriate, install the fixture on the mounting

module.

WARNING

To reduce the risks of ignition of hazardous atmo-

spheres and shock, do not apply power to the unit

until installation has been completed and unit is

tightly assembled and secured.

Install this unit in accordance with the applicable require-

ments in the latest edition of the National Electrical Code

and Canadian Electrical Code.

1. Mount using the following applicable method.

5. Apply power to the unit and ensure proper function.

WARNING

To reduce the risk of ignition of hazardous atmo-

spheres and shock, keep assembly tightly closed

when circuits are energized.

Cheshire, CT 06410 203-699-3300 (Ph)

203-699-3365 (Cust. Serv. Fax)

203-699-3078 (Tech. Serv. Fax)

STANCHION

116EX-S 1 1/4" HUB

CEILING

116EX-C 3/4" HUB

PENDANT

116EX-P 3/4" HUB

116EX-C

116 SERIES HOUSING AND GLOBE

ASSEMBLY WITH GUARD

WALL

116EX-B 3/4" HUB

Figure 1. Mounting Options

1 2 3 4

Résumé du contenu

Installation Instructions for 116DEXMST SeriesAdaptaBeacon® Supervised 16 - 33V DC Strobes forUse in Hazardous LocationsDescriptionDescriptionDescript

Page 2 - Figure 6. Wiring Diagram

P/N 3100758 ISSUE 1Figure 2. Detail of Pendant Mounting Figure 3. Detail of Ceiling MountingFigure 4. Detail of Wall Bracket Mounting Figure 5. De

Page 3 - Maintenance

P/N 3100758 ISSUE 1MaintenanceMaintenanceMaintenanceMaintenanceMaintenanceDisassemble the unit as follows (Figure 7):counterclockwise direction. Remo

Page 4

Table 1. 116 Series AdaptaBeaconsCatalog Electrical Conduit Flash Strobe TubeDescription Number Ratings Size Rate ReplacementHousing Less 116DEXMST*-

Commentaires sur ces manuels

Pas de commentaire

Edwards-signaling 116DEXMST Series Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Sécurité Edwards-signaling 116DEXMST Series. Edwards Signaling 116DEXMST Series User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Sécurité Edwards-signaling 116DEXMST Series